MDS MX-2104 Specifikace stáhnout pdf (Strana 193)

MX-2100/2104 Installation and Operation Manual Appendix F Command Set Description

Commands F-15

2. Change parameters as follows:

 Bring the cursor to the beginning of the first field to be changed by

pressing the space bar.

 To change the selected field, press F or B to scroll among the available

selections. When the desired selection is displayed, press the space bar

to move to the next field.

3. After the desired parameter values are selected, press ENTER

The second line of the database flip time definition screen is displayed:

HH:MM

FLIP TIME TO DATABASE 2 : 00:00

4. Define the second flipping time.

To disable the switching between the two databases, select NA for all the four

fields. You should always select NA if the switched backup database is ALTERNATE

(see DEF ML CALL command).

5. After the desired values are selected, press ENTER key to end.

MX-2100 displays the time and date fields, followed by the MX-2100

prompt.

DEF DP

Purpose

Define the communication parameters of the dial-out port.

The communication parameters depend on the KCL.2 module version:

• For KCL.2 modules with RS-232 interfaces, this command is used to define the

communication parameters of the dial-out port, select its operating mode

(network management access port or dial-out), and when applicable, control

the use of the call-out function. The communication parameters of the dial-out

port can be different from the communication parameters of the CONTROL

port, which are selected by means of the DEF SP command.

• For KCL.2 modules with Ethernet interfaces, there is only the

ROUTING_PROTOCOL field.

Format

DEF DP

Note

1 2 ... 188 189 190 191 192 193 194 195 196 197 198 ... 242 243

Žádné komentáře

MDS MX-2104 Specifikace Strana 193